Full-view Analog Camera CCTV Testing Monitor IP Address Scan With LED Lamp

Full-view Analog Camera CCTV Testing Monitor IP Address Scan With LED Lamp

Description:

The new CCTV tester is developed for the On-Site installation and maintenance of IP camera,analog camera and network device, with Video display, PTZ control, DC12v output power, Audio test, Color bar generator, RS 485 Data searching and Cable testing, which are the same to the previous models. The new developed functions include POE power supply testing, PING testing, Visual fault locator, IP address scan, Video snapshot, Video record, Image magnification, Port flicker, LED lamp etc. The new tester also has built in TDR cable testing, which is specialized designed for BNC cable testing in the security monitoring system. This function can accurately measure BNC cable and network cable’s break point and short-circuit location. The new tester designed with easy operation and portability makes it simple for a cctv technician or installer to install and maintain CCTV systems, improving work efficiency by reducing time in the field.

Features:

1. IP address scan, quickly search the IP address for the connected IP camera and other network devices NEW

2. Cable scan, send the specific signal, easy to find the connected cable

3. Moveable Micro SD

4. LED Lamp, easy to operate at night 

5. Visual fault locator, It is indispensable tool in fiber project constructing, fiber net-work maintaining, optical component manufacture and research. 

6. 10x zoom, video image can be magnified to view the details, easy to use

7. PING testing, test IP camera or other network devices' ethernet port whether work normally, and the IP address whether is right

8. POE voltage measurement, test the POE switch's voltage to IP cameras, wireless AP device and other PD devices 

9.  Port flicker, easy to find the connected POE switch port by sending special signals, the connected POE port will flicker at special frequency

10. TDR break point and short – circuit measurement( BNC cable, network cable etc)

Functions:

1. Video signal testing

The new cctv tester, built-in high definition 3.5”LCD-TFT 480(RGB)x320

Full-view display screen, easy and directly displays the camera image quality

Support PAL/NTSC

LCD screen brightness/Contrast/Color Saturation adjustable. Suitable for field construction and maintenance work

2. Video signal level test

Test video signal strength attenuation, longer video signal cable will cause the image to be dim, and reduce the image dynamic range, video signal is too strong, it will cause the virtual shadow, and reduce the sharpness of the image.

It also can real-display the video level value, if out of range, notices will be display in the screen. 

3. F1,F2 User-defined shortcut keys

The user-defined shortcut key is designed for improving the efficiency for the engineer, anytime press, easy to operate.

4. TDR Break-point and short-circuit measurement (Optional )

New function: TDR cable testing, accurately measure BNC cable, network cable, control cable break-point and short-circuits location. It improves working efficiency.

5. Visual fault locator

Visual Fault Locator with 650nm wavelength can emit red laser sources to test multi-mode and single mode fiber’s bending and breakage, and Continuous light-emitting and 1HZ, 2Hz modulating light output. It is indispensable tool in fiber project constructing, fiber net-work maintaining, optical component manufacture and research.

Specification:

Applications:

1. Find out the other end of the cable in security maintenance and network engineering

2. CCTV system installation and maintenance

—3. Dome camera and All in one camera testing
—4. The CCTV transmitting channel testing
5. —PTZ controller

Product photo: